Screenshots of PRTG Network Monitor
Seeing is believing. And we believe that you will like the way PRTG shows you every corner of your network.
Scroll through this page for some examples and see how simple monitoring your IT infrastructure can be.
Aggregated statistics (availability, bandwidth/traffic, CPU-load, alerting) provide the quickest possible overview of the current status of a complete network. These states are available for all sensors, as well as "per group," enabling the administrator to dig into the data from a birds-eye view of the network, down to each individual device.
If you need to know what applications or IP addresses are causing the traffic in your network you can use packet sniffing (PRTG looks at every single data packet travelling through your network for accounting purposes) or NetFlow/jFlow/sFlow-based monitoring. For both technologies PRTG can analyze the bandwidth usage and break it down to the network protocols or computers in your network.
Under PRTG Network Monitor, the monitoring is performed by "sensors". Sensors are managed using a tree-like hierarchy to create an easy to navigate list, providing the user with the possibility to arrange sensors in groups that monitor similar devices, locations or services. Users can create nested “groups”, each group containing a number of “devices”, each device containing a number of “sensors”.
- Alarms (red) are sensors that are either unavailable (e.g. due to a software crash or hardware failure) or that exceed a configurable value range (e.g. free disk space below 10%).
- Warnings (yellow) are triggered by services that are working slow (e.g. slow website) or by systems that are getting close to resource exhaustion (e.g. low memory or high cpu load).
- PRTG marks sensors with an "unusual" state (orange) if their current readings show unusual behavior when compared to readings in the past (computed through statistical analysis).
This list of 42 devices with 241 sensors was automatically created by PRTG during an auto-discovery scan in our test network. During this process the software scans a network segment or IP address range using PING, WMI, SNMP and other protocols. As soon as a device is discovered the device type is analyzed in order to select the most suited device template. More than 20 device templates with pre-configured sets of sensors are included.
The "Top 10 Lists" are a great tool to get a quick overview of all the systems in your network and to find potential resource problems. Top 10 lists are available for:
- Best and worst availability
- Fastest and slowest PING times
- Highest and lowest bandwidth usage
- Fastest and slowest website
- Highest and lowest CPU load
- Most and least disk space available
Reports are used to analyze historic monitoring results over a specified time such as one day, one month or one year.
PRTG includes a powerful reporting engine for ad-hoc, as well as scheduled report generation in PDF format. Reports can be run on-demand or can be scheduled (e.g. once a day). A report can be created for one or more sensors. The content and layout of the report is controlled by the report template of your choice and is the same for all sensors in a report.
This screenshot shows the long term comparison of request times for the homepage of www.paessler.com monitored from remote probes located around the globe.
PRTG's "maps" feature is a unique concept that enables the user to create web pages with up-to-the-minute monitoring status information in a customizable layout. There are countless possibilities for the implementation of maps. For example this feature can be used to:
- Create network maps with an overlay of status icons for each device on the map.
- Create "dashboard" views that can be shown on network operation center screens.
- Create a quick network overview for publishing on the Intranet, allowing at-a-glance information for management or other employees.
- Create a custom view of the most important sensors in your monitoring setup.
- Create Top 10 lists of the sensors of a specific group or device.
PRTG Network Monitor has been designed to work for networks of any size. It can be implemented in small networks with just a few devices (e.g. the Freeware edition is capable of monitoring 100 sensors for free) or you can integrate it in large networks using 10,000 sensors or more (currently up to 20,000 sensors are possible).